|
|
Bowcraft Procell Stone
-
 absorbent fleece matting, safe to walk on, special non-slip properties
-
can be used more than once very quick to lay
-
protects against mechanical impact (hammering/drilling/...)
-
protects from above, because it is impervious to moisture and does not wear out over months
-
protects from beneath, as "Protection Procell Stone" does not give off colour and moisture can escape
from mortar, no abrasive effect from dirtied floors, is absorbed by PE foam
-
cost-effective compared to conventional protection (chipboard with fleece) bringing advantages in
storage costs, laying costs and disposal costs (lower disposal costs in PE Container)
-
patent protected
-
does not give off any colorant even when wet
-
suitable for marble or high-quality stone flooring
|
| |
|
|
| |
 Cost Comparison:
to chipboard |
|
| |
|
| BOWCRAFT PROCELL STONE: |
approx. 4,10 - 4,30 €/m²
|
| Laying costs maximum |
approx. 0,15 €/m²
|
| Disposal costs |
approx. 0,10 €/m²
|
| Storage costs |
approx. 0,05 €/m²
|
Handling costs approx.
(unloading from truck,
transport to the building site)
|
approx. 0,05 €/m²
|
| Total costs: |
Maximum approx. 4,45 - 4,65 €/m²
|
| |
|
| CHIPBOARD: |
approx. 2,90 €/m²
|
| Fleece under chipboard |
approx. 0,60 €/m²
|
| Laying costs |
approx. 1,00 €/m²
|
| Disposal costs |
approx. 1,00 €/m²
|
| Storage costs |
approx. 0,30 €/m²
|
| Handling costs |
approx. 0,50 €/m²
|
| Total costs: |
Maximum approx. 6,30 €/m²
|
|
| |
|
Data Sheet Bowcraft Procell Stone
Multi-functional laminate with approx. 1.2 mm overall thickness and the following structure
Upper-side: absorbent fleece to absorb liquids
Core layer: elastic PE foam with 100 KG/m2 and 1.0 mm thickness
Under-side: special film with anti-slip effect
| Colour |
|
white |
|
| Thickness |
[mm] |
1,2 ±0,2 |
(DIN 53572) |
| Surface weight |
[g/m2] |
270+10% |
(DIN 53577) |
| Compression hardness at 25 % compression |
[kg/m2] |
4900 |
(DIN 53571) |
| Tensile strength longitudinal |
[N/mm2] |
5,43 |
(DIN 53571) |
| Tensile strength transverse |
[N/mm2] |
3,58 |
(DIN 53571) |
| Elongation at break longitudinal |
[%] |
55 |
(DIN 53571) |
| Elongation at break transverse |
[%] |
56 |
(DIN 53571) |
| Temperature application range |
[°C] |
-20 to +70 |
|
Properties:
absorbable, closed cellular structure, finely pored, manufactured without CFC
Resistance to various media:
water, salt solutions, acids, bases, paint, cement, partly resistant to organic solvents and hydrocarbons
The above data are based on the current state of knowledge as well as on Information from our suppliers and do not represent a warranty of self-protection in a legal sense. It is the user's own responsibility to observe statutory provisions.
|
|
|
|
Newsletter
